Product Description:
Customized Intelligent IoT Cabinet is an intelligent device
developed by combining the project characteristics of intelligent
video surveillance system and the demand for Internet information
management. It integrates multi-service data monitoring, remote
control, active alarm, platform monitoring and other functions.
Features:
● Working power supply output support over current/short circuit
protection, loss of phase protection, loss of voltage/overvoltage
protection, leakage protection.
● Working power output support automatic closing and remote
control.
● Max lightning protection discharge current (Imax) 20KA, 40KA,
60KA, 80KA and other specifications are available.
● A special SPD PDU for the ground chassis is configured to form
multiple surge protection units with the power surge protection
module.
● Built-in insurance unit for each power output.
● Real-time alarm of illegal power taking and overload power
consumption to ensure power safety.
Technical Parameters:
| Pre-warning operation and maintenance management unit | Port | 1 RJ45 port |
| RJ45 port | 10/100M automatic detection, full/half duplex MDI/ MDI-x adaptive |
| Ethernet standard | IEEE 802.3 10Base-T
IEEE 802.3u 100Base TX
IEEE 802.3x |
| Management and maintenance | ●support the WEB management mode
●support SNMP v1/v2/v3
●supports remote unified upgrade |
| Supported Functions | ●support temperature control, heat dissipation, and intelligent
dust removal ●support LED lighting intelligent opening
● support stroboscopic indicator is enabled periodically
●support access switch buzzer alarm
●supports tilt collision detection
●supports water immersion status detection
●real-time temperature and humidity data can be obtained
●supports remote power control
●supports smart Bluetooth electromagnetic lock management and
remote control
●supports SPD status detection and lightning strike count
statistics
●supports the management and control of the positioning module |
| Pre-warning operation and maintenance management unit | | ●supports the management and control of 4G network transmission
modules
●support capture camera management control
●support real-time indication of working status
●support power statistics |
| Industry standard | IEC(EN)61000-4-2(ESD) :±8kV contact discharge,±12kV air discharge IEC(EN)61000-4-3(RS) : 10V/m(80～1000MHz) IEC(EN)61000-4-4(EFT) : network port : ±4kV CM//±2kV DM ; IEC(EN)61000-4-5(Surge) : network port : ±4kV CM//±2kV DM ; IEC(EN)61000-4-6(radio-frequency conduction) :
3V(10kHz～150kHz),10V(150kHz～80MHz) IEC(EN)61000-4-16(common-mode conduction) : 30V cont. 300V,1s IEC(EN )61000-4-8 |
Support and Services:
Our team of experts is always available to answer any questions you
may have about our products. We are dedicated to helping you get
the most out of your IOT equipment.
