Rugged POE Ethernet Switch For Data Transfer Rate 10/100/1000 Mbps
Working Temp -40-85°C
Product Description:
Our POE Ethernet Switch uses the design of industrial redundant
ring net, and you can find two fiber ports which make up the ring
net in every transmission equipment. The ring network topology
structure is composed through hand in hand cascading, which can
achieve no phase delay transmission of the 1080p HD network
signals. The purpose of industrial redundant ring net design is to
achieve the stability, reliability and instantaneity of the data
transmission in a harsh environment. The working principle is that
the network signals become ring structure in physical connection
while chain structure during work. Once out of connection in the
transmission optical cable, the device would switch to the spare
line to transmit. The redundant ring net structure not only reduces
the risk of data signals transmission, but also simplifies the
project installation and lowers the project costs.
Features:
Supporting all the network HD cameras and other network signals;
Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other
internet protocol;
Supporting the transmission pattern of full-duplex and
half-duplex, with the ability of automated negotiation;
Having the function of setting ring net in all the devices, and
change transmission while the disconnection of the intermediate
node;
Supporting POE on the network port;
Providing the transmission of ultra low delayed data;
Protecting from network broadcast radiation;
Providing 4 set adaptive POE Ethernet ports, which can link with
internet camera, the switch and so on;
Adapting parallel or cross-wire connection;
Having APC circuit, with constant optical power output and wide
dynamic range;
10/100/1000Mbps optical fiber transmission, with large capacity
which could be upgraded easily;
Having advanced adaptive technology, no field of the use of
optical or electrical adjustment
Adapting three-level lighting protection technology on the
computer ports and network signals.
IPC Extender: support dial the code switch to set up monitoring
mode function, extended the IPC access distance to be 250M
VLAN function: Block mutual communication between downlink ports;
improve the efficiency of data forwarding to ensure the safety of
system, inhibit network storm functions: automatic identification
and filtering broadcast packets.
Support the din rail & desktop installation
Support the CBIT to ensure the HD image.
Built-in industrial switch IC. High-speed processing capability
and capacity of the cache, ensure a stable and reliable network.
Fanless cooling circuit design, built-in heatsinks, thermal
adhesive, such as multiple thermal structure design makes it in all
kinds of consistent performance in harsh environment, operating
temperature ranges up to -40℃ ~ +85℃.
Design with internal device precision compact size, in full
consideration of the space requirement for installation.
Industry-standard design, high strength metal enclosure, IP40
protection.
Technical Parameters:
| Backboard bandwidth | 12G |
| Cache | 1M |
| MAC address table | 1K |
| Maximum frame length | 1632bytes |
| Network port | 4 10/100/1000Base-T(X) POE RJ45 ports |
| 1000Mbps fiber port | 2 gigabit SFP slots |
| Optical fiber port transmission distance | 0-100km |
| Optical transmission power | -10~-2 dBm |
| Optical RX sensitivity | ≤-24 dBm |
| Protection grade | IP40 |
| Heat dissipation mode | internal heat sink energy circuit heat dissipation, no fan silent
design |
| MTBF | 100,000 hours |
| Rated input voltage | DC44~57V |
| Power terminal | 6 pin terminal interface |
| Power | ≤4W |
| POE Standard Protocol | IEEE 802.3af/at |
| POE Pin Definition | V+,V+,V-,V- Corresponding to 4,5,7,8 (1.2.3.6 can be custom-made) |
| POE Input Voltage | DC+44~+57VDC |
| POE Output Power | IEEE802.3af:15.5W IEEE802.3at:30W |
| EN61000-4-2 anti-static | ±8KV contact discharge；±15KV air discharge |
| EN61000-4-3 EMF | 10V/m(80~1000MHz) |
| EN61000-4-4 EMF | ±10KV power cord, ±2KV data cable |
| EN61000-4-5 surge voltage | ±6KV/CM,±6KV/DM power cable,±2KVdata cable |
| EN61000-4-6 Anti-conduction | 3V(10KHz～150KHz),10V(150KHz～80KHz) |
| Mechanical | IEC60068-2-6(shock), IEC60068-2-27(impaction), IEC60068-2-32(free
drop shock) |
| Working temperature | -40 ~ 85℃ |
| Working humidity | 5% ~ 95%(non-coagulation) |
Applications:
AEO's POE Ethernet Fiber Switch is a reliable device for
industrial, enterprise, and commercial applications. It is designed
with 4 ports and supports data transfer distance of up to 100km.
The switch is compliant with CE, FCC, and ROHS certifications, and
has an operating temperature range of -40 to 85°C and a storage
temperature range of -45 to 80°C. It consumes a maximum of 30W and
has a minimum order quantity of 1 set. Packaging is available in
boxes or cartons and delivery is within 3-4 working days. Payment
terms are 100% T/T in advanced and a supply ability of up to 10,000
pieces per month.
Support and Services:
POE Ethernet Switch Technical Support and Services
- 24/7 telephone and online support
- Onsite installation and maintenance
- Remote troubleshooting and diagnostics
- Software updates and upgrades
- Replacement parts and components
- System performance optimization
- Data backup and recovery
Packing and Shipping:
Packaging and Shipping for POE Ethernet Switch:
The POE Ethernet Switch will be shipped in a sturdy cardboard box,
containing the switch unit, power adapter, mounting screws, and a
user manual. The box is designed to protect the switch from dust,
moisture, and other environmental elements during transit. The box
also contains a label with the product's serial number for tracking
and identification.
The box should be handled with care, and placed on a flat surface
during transit. The box should be kept dry and away from direct
sunlight. The box should be inspected for damage before shipping.
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
